wireless connect problem

[npsoliven]

failed to connect to wireless router
help me please, thanks!

[Kumar0307]

Hi @npsoliven

Welcome to the HP Support Community.I understand you are trying to connect the printer wirelessly to the PC.  I'd be happy to assist you.

Restart the wireless router, the printer, and the PC

• Make sure the printer and the PC are connected to the same wireless network.
• This printer supports only 2.4GHz network. So, the PC should be on the 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

Use WPS to connect the printer to your wireless network.

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

   NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!