• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We are proud to announce new Poly Studio Series video bars and remote room control with Poly Connect. Read more about the solutions!
HP Recommended

HI,

we have a full real presence Clariti setup, RPRM, DMA Core, DMA Edge and RMX.  All are at the latest versions.  we deploy RPD 3.15 as a client.

 

Calls from Cisco 8845 registered to Cisco CME to a VMR are fine but direct calls from Cisco 8845 to RPD Client receive no Video on RPD Client.  The stream is negotiated but in call stats no Format information is present and no Video is shown.  Video is sent from RPD and received by Cisco 8845 ok.  the same calls from other Cisco devices and Poly RPD Clients are fine just n video from the 8845.  The 8845 is on the latest patch as is CME. Has anyone managed to find a solution for this or knows if one exists?

 

Thanks

 

Rick

1 REPLY 1
HP Recommended

Hello @Rick Dickinson 

 

Greetings of the day !

 

The information you provided is not sufficient to analyze the root cause. Hence I would recommend you open a support ticket with Poly.

 

Note - Please check RPD version you have mentioned in the query, the latest version is 3.11.5.

 

 

 

 

 

 

 

 

 

 

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.