• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We are proud to announce new Poly Studio Series video bars and remote room control with Poly Connect. Read more about the solutions!
HP Recommended

Hi All

I have a Group 700 system Ver 6.17 in the Auditorium I look after

I have Preset set up as default so I can use 0 - 9 to control the cameras

If however I have to enter a Bridge Meeting ID/Password when dialling, I then select # to switch to DTMF and enter in the code

DTMF is then on for the whole meeting and I cannot use the presets

I believe I have pressed most keys to try and get back to presets instead of DTMF but cannot get them to work until the next call

Anybody know how to switch back?

Regards

Ade

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Once the Touch Tones Enabled times out you should be able to do presets.

 

What I would verify is in your configuration that the Keypad function is set to presets.  See the image.

View solution in original post

1 REPLY 1
HP Recommended

Once the Touch Tones Enabled times out you should be able to do presets.

 

What I would verify is in your configuration that the Keypad function is set to presets.  See the image.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.