cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
CollinHepp
New member
1 0 0 0
Message 1 of 2
393
Flag Post

Will a EVGA GTX 1050 FTW ACX 3.0 fit in a HP Envy 750-114 desktop

HP Recommended
Envy 750-114
Microsoft Windows 10 (64-bit)
Hi, I have a HP Envy 750-114 desktop and was wondering if a EVGA GTX 1050 FTW ACX 3.0 would fit inside the stock case. Thanks
0 Kudos
1 REPLY 1
Grzwacz
Level 12
Level 12
6,732 6,716 634 1,514
Message 2 of 2
Flag Post
HP Recommended

Hi Collin

 

You have to shut the PC down. Disconnect AC power. Depress the power switch to drain residual power from the motherboard.

 

Open side panel. Measure length on PCie x16 slot closest to the CPU. The 1050 is 10 inches.

 

If the new graphics card fits then you can do the upgrade. Your power supply meets the minimum 300 watt requirement.

 

You need a six pin supplemental PCIe power cable. Do you have it?

 

A successful upgrade requires you to go to BIOS. You must disable secure boot and enable legacy boot in security setting before you install the new graphics card..

 

You must also uninstall current graphics drivers before installing the new graphics card.

 

Grzy

 

 

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation