cancel
Showing results for 
Search instead for 
Did you mean: 
Fred20201900
New member
1 0 0 0
Message 1 of 2
137
Flag Post

Cannot activate HP setup to log to my WiFi for desk jet 2630

HP Recommended
Deskjet 2630
iOS

Cannot activate HP setup to log to my WiFi for desk jet 2630

1 REPLY 1
Kumar0307
HP Support Agent
HP Support Agent
18,837 18,836 1,339 1,551
Message 2 of 2
Flag Post
HP Recommended

Hi @Fred20201900

Welcome to the HP Support Community. I'd be happy to assist you.

 

Are you trying to connect the Deskjet printer to your wireless router?

Use WPS to connect the printer to your wireless network.

  1. Locate the WPS button on your router, but do not press it yet.

    If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

  2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

  3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

  4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

    NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

    Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

  • Make sure the printer and the MAC are connected to the same wireless network.
  • This printer supports only 2.4GHz network. So, the PC should be on the 2.4GHz network.
  • If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

To know how to print from your iOS device, refer to this document.

 

If you do not have access to a wireless router, you may still use Wifi-Direct to print from your iOS device to the printer.

Refer to this document to know how.

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation