cancel
Showing results for 
Search instead for 
Did you mean: 
JDL1234
New member
1 0 0 0
Message 1 of 2
357
Flag Post

Computer tells me it can’t find my Hp deskjet 2655?

HP Recommended
HP deskjet 2655
Mac OS X 10.10 Yosemite

Can’t find printer

HP deskjet 2655

1 REPLY 1
Kumar0307
HP Support Agent
HP Support Agent
18,946 18,948 1,350 1,561
Message 2 of 2
Flag Post
HP Recommended

Hi @JDL1234

Welcome to the HP Support Community. I'd be happy to assist you.

 

How is the printer connected to the MAC?

 

If you are trying to connect wirelessly, follow these steps:

 

Use WPS to connect the printer to your wireless network.

  1. Locate the WPS button on your router, but do not press it yet.

    If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

  2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

  3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

  4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

    NOTE: 

    The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

    Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

  • Make sure the printer and the MAC are connected to the same wireless network.
  • This printer supports only 2.4GHz network. So, the MAC should be on the 2.4GHz network.
  • If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.
  • Also, check with your Internet service provider if your router is able to forward 'Bonjour packets'.

To check the connectivity, perform a PING test

  1. Obtain the IP address of the printer by clicking on the Wireless icon on the printer
  2. On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box
  3. Check the second box that says Send only > 10 pings
  4. Click on ping > Check the results at the end if any packets are lost
  5. Note: There should be 0% packet loss, share the results in your next post.

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

 

KUMAR0307
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation