Connect HP deskjet 2600 to new wifi on ios

[bjm_65]

I have recently changed my WiFi network and need to reconnect the printer. I cannot delete the printer from the network list on iOS, therefore the ‘setup’ option is not appearing in the network list. Any help would be great.  I am using an iPad to print.

[Jay_G24 · Accepted solution]

Hi @bjm_65,

I'd like to help!

To assist better -

1.) Are the printer and ios devices connected to the same network?

2.) Is your router dual-band enabled i.e., both 2.4GHz and 5GHz? If yes, make sure the dual-band has different SSIDs for 2.4G and 5G networks.

3.) What is the distance between the router and the printer?

Meanwhile, you may try the below steps-

Press and hold the wireless and cancel button on the printer to restore the network on the printer

Please try the steps below to connect your printer to the network.

-->On the printer control panel, press and hold the Wireless button and the Resume button together for three seconds. (When Wi-Fi Direct is turned on, the Wi-Fi Direct icon on the display stays on)  
--->On your computer or phone go to wifi and connect it to your printer 
--->Select your printer with DIRECT in the name from the list of available networks (example: DIRECT-74-HP Deskjet2600).
--->Select the Wi-Fi Direct printer signal in Wi-Fi settings 
--->If prompted for a password, type 12345678. This is the default password to log in.
--->Now open a browser and type 192.168.223.1
--->you will be able to access the printer's EWS page 
--->on the page, you will find network - click on it 
--->go to wireless and select wireless setup wizard
--->now select the network that you want your printer to connect to and type in the password 
--->the printer will have solid blue light if it's connected 
--->then connect your phone back to your network
 

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping