cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
2 1 0 0
Message 1 of 4
185
Flag Post

Connecting printer to the Wifi

HP Recommended
HP DeskJet 3632 All-in-One Printer
Other

I have been trying and trying to get my HP DeskJet 3630 All-in-One Printer to connect to my Wifi with no success. My Wireless Network Test Results says Your HP printer is unable to connect to your wireless router... My Router is Pwrd ON and ALL of my other devices in the home are connected with no problems. 2 How do i check the SSIDs match? Is there something Im missing? 3 My printer is registered and I can see the printer by logging into my HP acct but I cannot set the printer up to a Network from the browser. Is there something wrong with the printer? When I press/hold the Wifi indicator for 3 sec the Wifi light then blinks but the signal bars within the display do not come on one at a time as stated in the Wireless Quick Start Guide, they instead blink in sync together Im not sure if that is significant to my problem but just thought it might help to identify the issue. 

3 REPLIES 3
Highlighted
Level 17
Level 17
29,361 29,083 5,043 11,496
Message 2 of 4
Flag Post
HP Recommended

Hi,

You should see the currently configured SSID listed on the Wireless Test Report, within the Current Configuration section:

https://support.hp.com/us-en/document/c04617078

 

If it matches, please let me know the test results - what exact failure is shown.

 

If it doesn't match, reset the wireless setting by pressing and holding both the Wireless and Cancel buttons till the power light starts blinking, then follow HP Smart to reconnect the printer.

 

See 'Connect a printer that does not have a touchscreen control panel >> Step 2: Connect the printer with the HP Smart app' below:

https://support.hp.com/us-en/document/c05987925

 

Shlomi



Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
0 Kudos
Highlighted
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

The Wireless Network Test Results says SSID Found- Fail.. It does list my network on the last page under the 802.11 networks discovered with a -35 signal strength and wps enabled with wpa2-psk aes/tkip encryption.  I did successfully reset by pressing the wifi and cancel buttons and going through the setup however the printer could not be found

0 Kudos
Highlighted
Level 17
Level 17
29,361 29,083 5,043 11,496
Message 4 of 4
Flag Post
HP Recommended

As you said it fails for SSID Found, you shoukd see the configured SSID listed later on the report, is the listed SSID is correct? Or may the old SSID is still listed, or may listed as not configured?



Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation