cancel
Showing results for 
Search instead for 
Did you mean: 
Brandy_Dan
New member
1 0 0 0
Message 1 of 2
111
Flag Post

Eprint services wont set up

HP Recommended
HP Officejet 6600
Microsoft Windows 10 (32-bit)

I have been trying to set up i my eprint services and for some reason it wont enable any suggestions

1 REPLY 1
Jay_G24
HP Support Agent
HP Support Agent
12,706 12,675 983 1,115
Message 2 of 2
Flag Post
HP Recommended

Hi @Brandy_Dan

 

Welcome to the HP Support Community. I'd be happy to assist you with the  "Cannot set up web Services" issue. 

 

Is your printer connected to the home network or public network?


What is the status of the wireless light on the printer, steady or blinking?

 

Follow the instructions below-

 

Check the network and printer connection status

 

Make sure your wired (Ethernet) or wireless network is working correctly and the printer is connected.

  1. Make sure the printer is not connect with a USB cable.

    NOTE: 

    When a USB cable is connected to the printer, the printer cannot connect to Web Services.

  2. If you are using a wireless router, check your router’s documentation or support website to make sure it meets the following requirements:

    • Check the router band: Many routers can operate in both 2.4 GHz and 5.0 GHz frequency bands, but not all HP printers support both bands. Make sure the 2.4 GHz router band is enabled and broadcasting. If the router broadcasts separate network names (SSIDs) for each band, connect the printer to the 2.4 GHz band SSID. If the printer supports 5.0 GHz, connect it to the 5.0 GHz band SSID.

    • Bonjour support (Mac only): HP recommends routers that support Bonjour, Apple's network discovery software. Connecting with Bonjour is the best way to find the printer and support wireless printing.

  3. Make sure your printer is not connected to a guest or host network, such as those networks found in schools, hotels, or home networks that allow guest logins. For more information see Can't Print on a Guest or Host Network.

  4. Confirm the printer is connected to the network.

    • Wireless network connection: On the printer, open the Wireless Network or Settings menu to verify the wireless feature is turned on, and then make sure the Wireless icon  light is solid and blue.

      If the wireless light is blue and blinks, move the computer and printer closer to the router, position the devices away from large metal objects such as bookcases, and move the printer away from devices that emit radio signals such as microwaves and cordless phones. Reconnect the printer to your network, and then make sure the wireless light is blue and solid. If your printer frequently drops the wireless connection, go to Printer Does Not Maintain Wireless Connection for detailed troubleshooting steps.

    • Wired (Ethernet) network connection: Check that the cable is connected to the printer Ethernet port  and to an available port on the router. The green link light should be steady, and the orange activity light should blink when the cable is connected.

      Figure : Connect the cable to the printer and to the router

      Connect the Ethernet cable to the printer and to the router
  5. On your computer, click the network icon  or  in the menu bar to view the network name and status of the connection.

    • If the selected network is not yours (for instance, if you connected to a neighbor's or a guest network), you must reconnect to your own network before turning on Web Services.

    • If the network signal strength is weak, move the computer and printer closer to the router, position the devices away from large metal objects such as bookcases, and move the printer away from devices that emit radio signals such as microwaves and cordless phones.

    • If the network status is not connected, confirm your network is working correctly, and then check the status again. Make sure a check mark or connected status displays next to the network name.

  6. Try to turn on Web Services.

If the issue persists, continue to the next step.

 

Restart the computer, printer, and router

To resolve many connectivity issues, restart the computer, printer, and router.

NOTE: 

The following steps temporarily disconnect network and Internet connections, and require restarting your computer. Complete any tasks or downloads in progress before you continue.

  1. Turn off the router by pressing the power button or disconnecting the power cord.

  2. Turn off the printer.

  3. Close all running programs on your computer, and then shut down the computer.

  4. Press the power button or reconnect the power cord to the router, and then wait for the Internet activity light to display a normal connected status.

  5. Turn on the printer.

  6. Turn on the computer.

  7. Try to turn on Web Services.

Try step 4 -7 Fromm the document -Cannot Connect to Web Services

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

 

Have a great day! 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation