Error Code 0X00829C98 HW Watchdog C On HP office jet 5255

[JGDurham]

Error messsge printer won’t do ANYTHING

[TEJ1602]

@JGDurham, Welcome to HP Support Community!

Is the printer connected to a WiFi network?

Let's try these steps:

Step 1: Power Reset

• Make sure this printer is plugged into a direct wall, not a surge protector.
• Turn the printer on.
• Wait until the printer is idle and silent before you continue.
• Remove all of your ink cartridges from the printer and close the door.
• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the rear of the printer.
• Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
• Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
• Reinsert the ink cartridges, and then close the ink cartridge access door.
• Check if you can print/copy
• If the issue persists, proceed to the next step.

Step 2: Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

Try printing.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!