-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- Mobile Printing & Cloud Printing
- Re: Errore stampante
Create an account on the HP Community to personalize your profile and ask a question
01-23-2019 10:29 AM
Errore print 0x6100000b
Solved! Go to Solution.
Accepted Solutions
01-25-2019 03:41 AM
Hi! @Rais84, Welcome to the HP Support Community. This is an English community, please post you query in English to assist you better.
Don't worry I'd like to help you out. Answer a few questions below to isolate the issue.
Did you make any changes to your printer?
Do you see any paper jammed on your printer?
Have you tried checking with a different ink cartridge?
Please share the operating system you are running on the PC.
Excellent description and a great diagnosis done. It is greatly appreciated.
Please try the steps recommended below.
In some cases, removing the ink cartridges and resetting the printer can clear the error message.
-
Turn on the printer.
-
Wait until the printer is idle and silent before you continue.
-
Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.
-
Remove the ink cartridges from the printer.
-
With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
-
Wait at least 60 seconds.
-
Plug the power cord back into the wall outlet.
NOTE:
HP recommends connecting the printer power cord directly to a wall outlet.
-
Reconnect the power cord to the rear of the printer.
-
Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
-
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
-
Reinsert the ink cartridges, and then close the ink cartridge access door.
-
If you receive a prompt to print a calibration page, do so.
-
If you disconnected the USB cable, reconnect it to the rear of the printer.
-
Try to print.
Also, try updating the printer firmware and check if it helps.
Update the printer firmware using this link. Click Here
Refer this article to further troubleshoot 0x errors on the printer. Click Here
If the issue still persists after trying out the steps. It is a hardware issue with the printer.
Please contact HP support for further assistance. Click Here
Note: For visitors to this page the steps suggested are dedicated to a particular product. If you are trying to solve the issue by using the same steps it might not work. Please post your query on HP support community to assist you better.
Let me know how it goes!
Have a great day ahead! 🙂
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
A4Apollo
I am an HP Employee
01-25-2019 03:41 AM
Hi! @Rais84, Welcome to the HP Support Community. This is an English community, please post you query in English to assist you better.
Don't worry I'd like to help you out. Answer a few questions below to isolate the issue.
Did you make any changes to your printer?
Do you see any paper jammed on your printer?
Have you tried checking with a different ink cartridge?
Please share the operating system you are running on the PC.
Excellent description and a great diagnosis done. It is greatly appreciated.
Please try the steps recommended below.
In some cases, removing the ink cartridges and resetting the printer can clear the error message.
-
Turn on the printer.
-
Wait until the printer is idle and silent before you continue.
-
Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.
-
Remove the ink cartridges from the printer.
-
With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
-
Wait at least 60 seconds.
-
Plug the power cord back into the wall outlet.
NOTE:
HP recommends connecting the printer power cord directly to a wall outlet.
-
Reconnect the power cord to the rear of the printer.
-
Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
-
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
-
Reinsert the ink cartridges, and then close the ink cartridge access door.
-
If you receive a prompt to print a calibration page, do so.
-
If you disconnected the USB cable, reconnect it to the rear of the printer.
-
Try to print.
Also, try updating the printer firmware and check if it helps.
Update the printer firmware using this link. Click Here
Refer this article to further troubleshoot 0x errors on the printer. Click Here
If the issue still persists after trying out the steps. It is a hardware issue with the printer.
Please contact HP support for further assistance. Click Here
Note: For visitors to this page the steps suggested are dedicated to a particular product. If you are trying to solve the issue by using the same steps it might not work. Please post your query on HP support community to assist you better.
Let me know how it goes!
Have a great day ahead! 🙂
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
A4Apollo
I am an HP Employee
10-26-2019 01:33 PM
Ciccio1
Thank you for visiting our English HP Support Community. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Community.
German: HP Gemeinschaft
Spanish: HP Comunidad
French: HP Communauté
Portuguese: HP Comunidade
Chinese: HP 社区
Korean: HP 커뮤니티
Thank you for your understanding
Didn't find what you were looking for? Ask the community