HP Envy 4520 in Error State

[Gerry54]

I followed previous message & solution to this problem, but after successfully deleting the HP Printer, I get an error message when I try to remove the printer driver:  "The specified printer driver is currently in use."  I had a couple of jobs in queue, but I cannot check the print queue  because I already deleted the printer.  The printer worked fine yesterday with no issues, and I have not made any changes anywhere to affect this.

[Jeet_singh]

@Gerry54,

Thank you for posting your query on HP Support Community,

Let's try these steps here: 

Perform a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now run HP Print and Scan Doctor: 

If you are facing any issue while using the printer then try using HP Print and Scan Doctor (PSDR). PSDR is an automated tool which can diagnose and resolve printing and scanning problems. Please go to this link: HP Printers - Using HP Print and Scan Doctor (Windows)  to download and run HP PSDR. Once you open the program, select your printer and click on “Fix Printing” to automatically diagnose and fix the issue.

I suggest you uninstall the printer drivers from the root level and then reinstall them by following the below steps:

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and OK - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP Envy printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Please click here to download and install the software.
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Let me know how it goes!

I hope you have a great day! 🙂

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!