cancel
Showing results for 
Search instead for 
Did you mean: 
Lynnetteian
New member
2 0 0 0
Message 1 of 2
133
Flag Post

HP Photosmart 5510 - prints get cancelled before they complete

HP Recommended
HP Photosmart 5510
Microsoft Windows 10 (32-bit)

After using this printer for a couple of years, I'm finding items sent to print don't complete. I've watched the printer display, which shows 'printing' very quickly followed by 'cancelled'.

Prime example - I go into Printer Home Page (EWS) and choose Web Services - print info page. The page gets sent to print, but only prints about 10% before getting cancelled.

Any ideas???

1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,611 3,965
Message 2 of 2
Flag Post
HP Recommended

@Lynnetteian Please follow the below steps to assign a manual/static IP to resolve your concern:

 

-Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going to the printers IP address in your browsers address bar, click Settings Tab/Auto-Off. --Or use the Printer Assistant, Printer Home Page (EWS). Also, check your Printers Properties.

-If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.

-If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and 8.8.4.4 at the Alternate DNS server. 

-Verify the printer is on the latest firmware by checking with the HP Support site.

 

In the router: (Refer to your router manual for information) 

 

Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest. 

Set router to 20Mhz only, or 145Mbps depending on the router. 

Always use WPA2-AES (Personal) encryption, but you can try `mixed' mode. 

Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your system now and helps with wireless connectivity (if you want to know why search the web).

If you have a dual-band router (2.4Ghz and 5.0Ghz bands), make sure the SSID's are NOT the same, they must be different for all bands, even for any Guest networks.

SSID broadcast must be enabled.

Save all settings. Power off both, wait 2 mins. Power on the router and wait 2 mins. 

Power on the printer and verify it reconnects to the router

 

You can also refer to the below video for the same. 

Note that, in the video, the interface shown is the Windows interface, but the steps are the same as it done using a web browser. 

And the article may have the title of another printer, but the steps are bound to help resolve your concern as well.

 

CLICK HERE TO WATCH THE VIDEO

 

P.S: Welcome to HP Community 😉

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation