Showing results for 
Search instead for 
Did you mean: 
Level 1
2 1 0 4
Message 1 of 1
Flag Post

Hitron Router/Modem Settings for HP Wireless Printers

HP Recommended
Microsoft Windows 10 (64-bit)

I finally figured out the issue! In a previous post, I thought the problem was changing from WPA2 to WPA. However, the problem is actually HP's lack of 802.11R configurations with their printers. Tisk tisk.

To change settings, go to and type "cusadmin" and your network password. Then, go to the "Wireless" tab up top, then "Advanced". Disable "802.11R" then "Save Changes".

Once your Hitron resets, your printer should properly display your network and prompt for the password. See the screenshot to make sure you change your settings on your Hitron modem/router correctly. Cheers!
Screen Shot 2020-06-16 at 12.39.35 AM.png

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation