cancel
Showing results for 
Search instead for 
Did you mean: 
TIFANNY
New member
2 1 0 0
Message 1 of 3
1,082
Flag Post

PRINTER HAS ENCOUNTERED CONFIGURATION ISSUE 0X80070570

HP Recommended
HP5525
Microsoft Windows 10 in S Mode

I am not able to print anymore, the printer has experienced a configuration error 0x80070570

2 REPLIES 2
TIFANNY
Author
New member
2 1 0 0
Message 2 of 3
Flag Post
HP Recommended

please help 

0 Kudos
Kumar0307
HP Support Agent
HP Support Agent
20,419 20,421 1,490 1,738
Message 3 of 3
Flag Post
HP Recommended

Hi @TIFANNY

Welcome to the HP Support Community. I understand you are not able to print because of an error. I'd be happy to assist you.

 

Where do you see this error? Is it on the printer screen or the PC?

 

For now, let us try these steps to resolve this issue:

 

Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Wait at least 60 seconds.
  3. Reconnect the power cord to the rear of the printer.
  4. Turn ON the printer, if it does not automatically turn on.
  5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

 

Update the printer firmware

Click here to download and install the latest firmware from your computer.

Click here to know different methods of updating printer firmware.

 

Try making a standalone copy and check if that works. By this, we can conclude if this is a hardware or a driver issue.

 

Also, check for any jams inside the printer. Make sure the print carriage is moving freely.

Refer to the steps mentioned in this document.

 

If you see this error on the PC screen, run HP Print and Scan Doctor to diagnose and fix any driver issue

Click here to download the file. Once downloaded, make sure to run the file to start the installation and click on 'Fix printing'.

If the issue persists, proceed to the next step.

 

Clean reinstallation of Pre-installed HP drivers

  1.  In Windows, search for and open Programs and features 
  2.  Select your HP Printer 
  3.  Select Uninstall 
  4.  In Windows, search for and open Devices and printers 
  5.  In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 
  6.  Open up the run command with the “Windows key + R” key combo. 
  7.  Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”) 
  8.  Click on the “Drivers” tab 
  9.  Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 
  10.  Select Ok 
  11.  Select Apply and Ok on the Print Server Properties windows 
  12.  Close Devices and Printers, restart the computer.

Click here to download the HP Full-featured driver.

Once downloaded, make sure to run the file to start the installation and follow the on-screen instructions.

Try printing.

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation