Photo tray

[Shan78]

I can't seem to print photos. I have re installed new drivers (I believe) but when I go into preferences to change to photo tray it states photo tray is not installed. How do I sort this out. I'm going mad! Thanks. 

[TEJ1602]

@Shan78, Welcome to HP Support Community!

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. For more information, go to Updating or Upgrading Printer Firmware.

Step 1: Make sure the photo tray is seated correctly

This error can occur if the printer trays are installed incorrectly. Make sure the printer is located on a flat surface, and then make sure the photo tray moves smoothly within the paper tray guides.

1. Make sure the printer is positioned on a flat surface.

2. Push in the output tray extender.

3. Pull out the input tray, but do not remove it.

   

4. Remove the output tray.

   

5. Make sure the photo tray is seated correctly, and that the photo tray guide tabs (grey) are sliding beneath the main tray guides (black) on both the left and right side of the input tray.

   

   

   If they are not in the correct position, gently move the photo tray to align the tab gaps, and then gently press the tabs back into position.

   The photo tray should move freely with no resistance.

6. Reinstall the output tray, and then make sure the edges line up with the input tray.

   

7. Try to print.

If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below: 

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

Now, download and install the full-featured software from here. Configure the printer and try printing.

Also, refer to the document HP Printers - How to Print Photos (Windows) for help.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!