cancel
Showing results for 
Search instead for 
Did you mean: 
camaro_J
New member
1 0 0 0
Message 1 of 2
117
Flag Post

Power won’t come on. Cord has power.

HP Recommended
HP. OFFICEJET 4630
Microsoft Windows 10 (32-bit)

Power button won’t control printer. No power. 

1 REPLY 1
Echo_Lake
HP Support Agent
HP Support Agent
23,484 23,442 1,064 1,097
Message 2 of 2
Flag Post
HP Recommended

@camaro_J
Thank you for posting on the HP Support Community.

 

Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details:

  • Are you seeing any damage or wires coming out from power cord?
  • Have you tried any troubleshooting steps?

While you respond to that, let's try these steps:

  • With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
  • Remove USB cable, if present.
  • Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
  • Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
  • Turn on the printer and wait till warm-up period finishes and the printer is idle.

Hope this helps! Keep me posted for further assistance.
Please click “
Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

ECHO_LAKE
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation