cancel
Showing results for 
Search instead for 
Did you mean: 
hang123
New member
1 0 0 0
Message 1 of 2
195
Flag Post

Printer cannot link to HP instand ink (Internet)

HP Recommended
DeskJet2700 82851E
iOS

Printer information page says: the printer might not be connected to HP Instant Ink anymore. The problem is I am run out of ink and the page amount on my phone app still only counts 78/100. The Instant Ink service does not deliver new ink. What should I do and how to get new ink?

1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
27,981 27,825 1,519 1,609
Message 2 of 2
Flag Post
HP Recommended

@hang123

 

Welcome to the HP support community.

 

I understand that your printer is not connecting to the HP instant ink account, I am glad to assist you to fix the web service connection error on your printer.

 

Meanwhile, follow these steps to fix the issue.

Turn On Web Services

  • Make sure the printer is connected to a wired (Ethernet) or wireless network with an active internet connection.

    NOTE: 

    If you connect your printer to a computer with a USB cable, web-connected printing services do not work.

    • If your printer is connected with a wired (Ethernet) connection, check the cable and the lights on the printer’s Ethernet  port. The green link light should be steady, and the orange activity light should blink when the cable is connected.

    • If your printer is connected with a wireless connection, make sure the wireless feature is on and the printer is connected to the same network as your computer.

      Some printers have a wireless icon  and a blue light on the front of the printer. If the printer has a blue light, and the light is on and not blinking, your printer is connected.

  • Print a Network configuration or Wireless Network Test Results page using button combinations on the printer control panel.

    • press the Wireless and Information buttons at the same time, or press the Wireless and Start Copy Black buttons at the same time.

  • Find the printer IP address on the printout.

    Example of a printer IP address.

  • Type the printer IP address into the browser address line, and then press Enter.

    NOTE: 

    Make sure to type the IP address into the internet browser's address box. If typed into a toolbar search box or search engine, the EWS does not open.

  • If a login or certificate window displays, complete the information to finish opening the EWS.

    • If a website security certificate displays, click Continue to open the EWS.

    • If a login window opens, type admin for the username, and then type the PIN found on the printer UPC sticker located underneath or on the back of the printer, or the password set by the printer administrator.

      Example printer UPC sticker with PIN

  • On the EWS, click the Web Services tab.

    • If the tab is not available, your printer does not support Web Services.

    • If a summary page displays, Web Services is already on.

      Example of clicking Print Info Page.

    • If a setup page displays, follow the prompts to turn on Web Services.

      NOTE: 

      If you cannot turn on Web Services, make sure the printer firmware is up-to-date. For more information, go to Updating or Upgrading Printer Firmware.

      Example of the Web Services setup webpage

Refer to this HP document for more assistance:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation