cancel
Showing results for 
Search instead for 
Did you mean: 
Jayne791
New member
1 0 0 0
Message 1 of 2
84
Flag Post

Problem with printer

HP Recommended

I have a HP pHOTOSMART 5520 printer that is saying my printer is in error status - can you help dont know what to do ? 

1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
25,619 25,500 1,407 1,476
Message 2 of 2
Flag Post
HP Recommended

@Jayne791

 

Welcome to the HP support community.

 

Which operating system is installed on the computer to which this printer is connected?

Meanwhile, follow the below steps if you are using a Windows computer.

Welcome to the HP support community.

 

Use HP Print and Scan Doctor to check connectivity

Download HP Print and Scan Doctor.

  1. Run HPPSdr.exe from the download location on your computer.

  2. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

    • If your printer is not in the list, turn it off and on, and then click Retry.

    • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

  3. If a screen prompts you to turn on printer updates, click Yes.

  4. If a screen prompts you to make your printer the default printer, click Yes.

  5. Try to print.

Assign a manual IP address and that should fix the issue.

  1. A Network Configuration Page lists important network settings such as network status and the printer IP address.

  2. On the printer control panel, touch the Wireless icon .

  3. Touch Print Info.

Setting a Static IP Address

Once you know your printer’s IP address from the page you printed, entering it is pretty easy. Here’s what you do:

HP Printer Static IP Address

  1. Run your Web browser.
  2. In the Web browser’s address bar, type the IP address of your printer and press Enter. Assuming you entered the right address, the HP printer control panel should appear.
  3. Click the Networking tab.
  4. Under Connections, click Wireless.
  5. Under IP Address Configuration, click Manual IP.
  6. Enter the IP address, subnet mask, and default gateway in the appropriate boxes.
  7. Click Apply.

You can refer this HP document for more assistance:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation