cancel
Showing results for 
Search instead for 
Did you mean: 
emmanuel8x6p
New member
2 0 0 0
Message 1 of 2
90
Flag Post

changed modem and need to connect to wireless print.

HP Recommended
HP Laserjet pro MFP M281 and M426

Have two printers need to connect to my wifi to print.

it was connected prior but changed modem and router settings.

need it to work in a new network setting.

 

Please help!!!!!

 

1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
25,668 25,549 1,409 1,480
Message 2 of 2
Flag Post
HP Recommended

@emmanuel8x6p

 

Welcome to HP support community.

 

Follow these steps to connect HP Color LaserJet Pro M281 to Wireless network:

Restore the factory-set defaults

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup icon to open the menu.

2. Scroll to and select the Service menu.

3. Scroll to and select Restore Defaults, and then touch OK. The printer automatically restarts.

 

Follow these steps to connect the printer:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation