cancel
Showing results for 
Search instead for 
Did you mean: 
Niva9
Level 1
3 1 0 0
Message 1 of 2
113
Flag Post

cp1025nw fails connection to hp eprint

HP Recommended
CP1025NW

Attempting to reconnect my cp1025nw printer to hp eprint after a firware upgrade to 20200617.

Before the upgrade the printer was connected to eprint, but some months ago it stopped working.

I did a "reset to system defaults" and then upgraded the firmware to 20200617.

The printer does not display any claim code in the configuration report - so I cannot register it on the hpsmart site.

I have tried to re-use the claim codes that I used before the system reset, but hpsmart says that these are invalid.

Attempting to enable web services through the EWS:

 

I get  "connection error. Check internet connection"

 

The printer IS connected to LAN through a WIFI router which also supplies an internet connection to all units in the house, including my computer, so I know that the router's internet connection is working.

The printer IP is set manually. Only IPv4 is enabled.

Is this a matter of opening/forwarding certain services, ports or protocols in the router? I have not blocked any.

 

Any help will be appreciated.

1 REPLY 1
Jay_G24
HP Support Agent
HP Support Agent
10,985 10,955 802 896
Message 2 of 2
Flag Post
HP Recommended

Hi @Niva9,

 

I'd like to help!

 

Try the below suggestions-

 

Check the network and printer connection status

Make sure your wired (Ethernet) or wireless network is working correctly and the printer is connected.

  1. Make sure the printer is not connected with a USB cable.

    NOTE: 

    When a USB cable is connected to the printer, the printer cannot connect to Web Services.

  2. If you are using a wireless router, check your router’s documentation or support website to make sure it meets the following requirements:

    • Check the router band: Many routers can operate in both 2.4 GHz and 5.0 GHz frequency bands, but not all HP printers support both bands. Make sure the 2.4 GHz router band is enabled and broadcasting. If the router broadcasts separate network names (SSIDs) for each band, connect the printer to the 2.4 GHz band SSID. If the printer supports 5.0 GHz, connect it to the 5.0 GHz band SSID.

    • Bonjour support (Mac only): HP recommends routers that support Bonjour, Apple's network discovery software. Connecting with Bonjour is the best way to find the printer and support wireless printing.

  3. Make sure your printer is not connected to a guest or host network, such as those networks found in schools, hotels, or home networks that allow guest logins. For more information see Can't Print on a Guest or Host Network.

  4. Confirm the printer is connected to the network.

    • Wireless network connection: On the printer, open the Wireless Network or Settings menu to verify the wireless feature is turned on, and then make sure the Wireless icon  light is solid and blue.

      If the wireless light is blue and blinks, move the computer and printer closer to the router, position the devices away from large metal objects such as bookcases, and move the printer away from devices that emit radio signals such as microwaves and cordless phones. Reconnect the printer to your network, and then make sure the wireless light is blue and solid. If your printer frequently drops the wireless connection, go to Printer Does Not Maintain Wireless Connection for detailed troubleshooting steps.

    • Wired (Ethernet) network connection: Check that the cable is connected to the printer Ethernet port  and to an available port on the router. The green link light should be steady, and the orange activity light should blink when the cable is connected.

      Figure : Connect the cable to the printer and to the router

      Connect the Ethernet cable to the printer and to the router
  5. On your computer, click the network icon  or  in the menu bar to view the network name and status of the connection.

    • If the selected network is not yours (for instance, if you connected to a neighbor's or a guest network), you must reconnect to your own network before turning on Web Services.

    • If the network signal strength is weak, move the computer and printer closer to the router, position the devices away from large metal objects such as bookcases, and move the printer away from devices that emit radio signals such as microwaves and cordless phones.

    • If the network status is not connected, confirm your network is working correctly, and then check the status again. Make sure a check mark or connected status displays next to the network name.

  6. Try to turn on Web Services.

If the issue persists, continue to the next step.

 Restart the computer, printer, and router

To resolve many connectivity issues, restart the computer, printer, and router.

NOTE: 

The following steps temporarily disconnect network and Internet connections, and require restarting your computer. Complete any tasks or downloads in progress before you continue.

  1. Turn off the router by pressing the power button or disconnecting the power cord.

  2. Turn off the printer.

  3. Close all running programs on your computer, and then shut down the computer.

  4. Press the power button or reconnect the power cord to the router, and then wait for the Internet activity light to display a normal connected status.

  5. Turn on the printer.

  6. Turn on the computer.

  7. Try to turn on Web Services.

If the issue persists, try the steps in the document -Cannot Connect to Web Services

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation