ePrint job received but does not print results on my Officejet 9010e series printer

[TopECat]

ePrint did work before I just updated to the new firmware as 07/11/22

[Betty0610]

@TopECat

Welcome to the HP Support Community.

Let's remove and add web services:

To remove Web Services using the printer control panel 1. From the top of the screen, touch or swipe down the tab to open the Dashboard, touch ( HP ePrint ), and then touch (Web Services Settings). 2. Touch Remove Web Services.

To set up Web Services using the printer control panel 1. From the top of the screen, touch or swipe down the tab to open the Dashboard, and then touch ( Setup ). 2. Touch Web Services Setup . 3. Touch Accept to accept the Web Services terms of use and enable Web Services. 4. On the screen that appears, touch OK to allow the printer to automatically check for product updates.

NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the proxy details, contact your network administrator or the person who set up the network.

5. If the Printer Update Options screen is displayed, select one of the options. 6. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[TopECat]

On the control panel screen, I do not have a HP ePrint icon.  Therefore, I cannot open the Web Services to remove it as suggested.  I can open Web Services through the HP Smart app but have no way to remove Web Services as recommended.  Any further suggestions to remedy this issue would be appreciated.

[Betty0610]

We'll have to perform a reset on the Printer for this. I have sent you a private message, for more details that cannot be shared in a public post.

Please do check your inbox on the communities page for the private message.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!