cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Valerio11
New member
1 0 0 0
Message 1 of 2
183
Flag Post

Solved!

eprint

HP Recommended
laserjet 203
macOS 10.15 Catalina

Schermata 2021-02-06 alle 15.14.58.pngif I send mail to print I receive confirmation of the stamp but I don t receive anything.....

1 ACCEPTED SOLUTION

Accepted Solutions
ShlomiL
Level 17
Level 17
33,066 28,222 5,585 12,217
Message 2 of 2
Flag Post
HP Recommended

Hi,

Please open the Home Tab and click on Device Configuration,

 

\What is the listed Firmware Datecode for the printer?

 

Assuming its not the latest and lists an earlier date than 20201023, follow below utility from your Mac to update the firmware, and then check for any difference:

https://ftp.hp.com/pub/softlib/software13/FW_CPE_Consumer/LJ_M203/HP_LaserJet_Pro_M203_Ultra_M206_Pr...

 

Shlomi



Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
ShlomiL
Level 17
Level 17
33,066 28,222 5,585 12,217
Message 2 of 2
Flag Post
HP Recommended

Hi,

Please open the Home Tab and click on Device Configuration,

 

\What is the listed Firmware Datecode for the printer?

 

Assuming its not the latest and lists an earlier date than 20201023, follow below utility from your Mac to update the firmware, and then check for any difference:

https://ftp.hp.com/pub/softlib/software13/FW_CPE_Consumer/LJ_M203/HP_LaserJet_Pro_M203_Ultra_M206_Pr...

 

Shlomi



Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂

View solution in original post

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation