hp eprint stopped working 2 days ago

[BARNEY25]

officejet 5230 eprint stopped working 5 days ago  hp eprint email address not being shown 

error message is web services could not be set up at this time. Printer will try again later

printer is connected to the network, i can print scan and copy ok from laptop

[TEJ1602]

@BARNEY25, Welcome to HP Support Community!

Follow the steps below-

Restart the computer, printer, and router

To resolve many connectivity issues, restart the computer, printer, and router.

NOTE: 

The following steps temporarily disconnect network and Internet connections, and require restarting your computer. Complete any tasks or downloads in progress before you continue.

1. Turn off the router by pressing the power button or disconnecting the power cord.

2. Turn off the printer.

3. Close all running programs on your computer, and then shut down the computer.

4. Press the power button or reconnect the power cord to the router, and then wait for the Internet activity light to display a normal connected status.

5. Turn on the printer.

6. Turn on the computer.

7. Try to turn on Web Services.

See if that works, or continue with further troubleshooting.

Try these steps to re-enable the web-services -

Step 1 Remove the Web-Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, touch ( HP ePrint ), and then touch (Web Services Settings).

2. Touch Remove Web Services.

Reboot the devices.

Step 2 Enable the Web-Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, and then touch ( Setup ).

2. Touch Web Services Setup .

3. Touch Accept to accept the Web Services terms of use and enable Web Services.

4. On the screen that appears, touch OK to allow the printer to automatically check for product updates.

5. If the Printer Update Options screen is displayed, select one of the options.

6. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!