Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 3
Flag Post

printer not printing correctly. print and scan dr. never fully completes its scan

HP Recommended
hp 5530 envy printer
Microsoft Windows 10 (64-bit)

changes both ink cartridges and ran the alignment test and cleaned the heads . the test page prints well. but printing from the computer does not. the computer recognizes the printer though. the printer sounds like its working but nothing gets printed.there are no paper jams, the page shoots out with little on it.

HP Support Agent
HP Support Agent
29,155 29,140 1,953 2,593
Message 2 of 3
Flag Post
HP Recommended



Welcome to the HP Support Community!


I reviewed your post and I understand that you are facing issues printing from your computer.


Don’t worry, I assure you I will try my best to get this sorted.


I recommend you root uninstall the printer and then reinstall it and check if it helps.


Here is how it is done.


1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Restart the PC

14.) Download and install the printer software from the below link.


Let me know how it goes and you have a great day!


If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!




I am an HP Employee

0 Kudos
HP Support Agent
HP Support Agent
23,520 23,478 1,065 1,097
Message 3 of 3
Flag Post
HP Recommended


Thank you for posting back. 


Let's run SFC scan first and then try the above troubleshooting steps that should fix this issue. 

Perform SFC Scan:  

1. Use Windows shortcut keys Win + X to open the quick menu and then select Command Prompt (Admin).  

2. At the command prompt, type the following commandsfc/scannow  

3. Press ENTER  

4. Thesfc/scannowcommand will scan all protected system files, and replace corrupted files. Note Do not close this Command Prompt window until the verification is 100% complete. The scan results will be shown after this process is finished.    


Hope this helps! Keep me posted for further assistance.
Please click “
Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation