cancel
Showing results for 
Search instead for 
Did you mean: 
Enomis
New member
1 0 0 0
Message 1 of 2
117
Flag Post

problems connecting the printer to wifi.

HP Recommended
officejet 4630
Other

Since I changed the internet service at home I can no longer connect the printer to the wifi, I have tried with every assistance mode, I have no mac filters set on the network.
can someone help me?

1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
18,899 18,877 1,559 1,557
Message 2 of 2
Flag Post
HP Recommended

@Enomis, Welcome to HP Support Community!

 

Follow the steps below-

 

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

 

To prepare your printer for a wireless connection, restart the printer, computer, and router.

  1. Turn the printer off, and then wait 10 seconds.
  2. Disconnect the printer power cord from the printer.
  3. Turn off the computer or the device you are trying to print from.
  4. Connect the printer power cord to the printer, and then turn on the printer.
  5. Disconnect the power cord from your wireless router, and then wait 10 seconds.
  6. Reconnect the power cord to the router. Wait until Internet service is restored. Internet service is interrupted while the router is off.
  7. Turn on the computer.

You may need to instead go into your router settings and try changing the channel manually. Experiment with different channels to see which one works best. You can contact your ISP for help.

 

Reconfigure the printer on the network-

  1. From the home screen of your printer control panel, touch the Wireless icon .

  2. Touch the Setup icon .

  3. Touch Restore Network Defaults or Restore Network Settings, and then touch Yes to confirm your selection.

  4. After the default network settings are restored, touch the back arrow, touch Wireless Settings, and then touch Wireless Setup Wizard.

    The printer searches for available networks.

  5. Touch the name of your wireless network.

  6. If your wireless network does not display in the list of wireless networks, touch Enter New Network Name, and then type the name of your wireless network.

    NOTE: 

    Type the exact network name, including any uppercase and lowercase letters.

  7. Type the WEP or WPA key (network password), and then touch Done.

    If you do not know your network password, go to Find Your Wireless WEP, WPA, WPA2 Password.

    Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Refer to the document HP Printers - No Connection after Router or Wi-Fi Settings Change

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation