cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
BSAOBIO
New member
1 0 0 0
Message 1 of 2
294
Flag Post

Audio not work after accidentally hitting my headphones out of the laptop

HP Recommended
LAPTOP
Microsoft Windows 10 (64-bit)

I accidentally hit my headphones while they were plugged into the laptop. They came out and I was able to re-plug them back in. But I noticed the change in the audio with the volume. I went to device manager and disabled them and restarted the laptop. I quickly noticed that the audio does not work with listening to music but does work a bit while listening to someone talking. Is there a way to fix this? It has also caused a change in the volume as it is more lower.

1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 22,298 2,620 3,523
Message 2 of 2
Flag Post
HP Recommended

@BSAOBIO Greetings from the HP Community!

 

Note: Please ensure the complete product name/number for a quicker response from the community, as we need to know what we are dealing with to provide an accurate solution: 

Click here for steps on finding the information we need!

Remember: Do not share any of your personal information such as serial, phone number, email ID, etc.

 

Did you connect an alternate headphone or an external set of speakers to check if that works fine?

Also, Did the accident cause any physical damage? If yes, is your device covered by any accidental damage protection warranty?

 

Meanwhile, I suggest you run a hardware test on the audio card using the below steps:

Install the latest version of the HP Hardware diagnostics (UEFI) on your device using this link: Click here for details

  • Hold the power button for at least five seconds to turn off the computer.
  • Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
  • On the HP PC Hardware Diagnostics (UEFI) main menu, click omponent Tests.
  • Click Audio Test.
  • Click Run once, or Loop until error.
  • While the test is running, the time remaining and test result for each component display on the screen.

If a component fails a test, write down the failure ID (24-digit code) for when you respond back to us.

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.

Riddle_Decipher
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation