cancel
Showing results for 
Search instead for 
Did you mean: 
Afiq_Imanov
New member
2 0 0 0
Message 1 of 2
145
Flag Post

HP Pavilion x360 — 14-ba101nt

HP Recommended
HP Pavilion x360 — 14-ba101nt
Microsoft Windows 10 (64-bit)

Dear all,

 

Please help, In this laptop mic doesn't working correctly, Please help me solve this problem. 

 

 

 

1 REPLY 1
praveen196
HP Support Agent
HP Support Agent
10,488 10,490 476 754
Message 2 of 2
Flag Post
HP Recommended

@Afiq_Imanov Welcome to HP Community!

 

I understand you have microphone issues with your PC.

 

Don't worry I'd like to help you out.

 

Did you make any software or hardware changes on your PC?

 

Please share the product number of your PC to assist you better.

 

As you mentioned the internal microphone on your PC has stopped functioning.

 

If you have issues with the microphone, please try the steps mentioned below.

 

Right, click or hold tap on the Volume Control icon.

Left click or tap on the “Recording Devices” feature from the menu that pops up.

Right-click on an open space in the “Recording” box and left-click or tap on the “Show Disabled devices” feature.

Right-click again in the “Recording” box and check the “Show disconnected devices” feature as well.

Now in the Recording menu, you will have more icons like External Microphone, Internal Microphone Array, and Stereo Mix. You will need to right click on them and left click on the “Enable” option for each one.

Right-click on the ” Internal Microphone Array” icon and set it to default for the “playback” feature and also set it as a default communication device.

Left click or tap on the “Apply” button in order for the changes to take effect.

Note: If after choosing the Apply button the system stops responding you will have to close the window and try again only this time set the playback feature as default then save your changes and only afterward set it as default communication device.

Right, click or hold tap on “Internal Microphone Array”.

Left click or tap on the “Properties” feature.

Left click or tap on the “Effects” feature.

Check the box next to the “Disable System Effects” feature.

Left click or tap on the “Apply” button again.

Right-click or hold tap on the “Volume Control” icon and left-click or tap on the “Playback Devices” feature.

Right-click on the “Speakers” icon and set it as “default device” and also “Default Communication device” for the system.

Left click on the “Apply” button after you are done.

 

Re-enable the microphone

 

Go to Settings > Privacy
Head over to the Microphone section
Now, just toggle Let apps use my microphone

 

Also, Run Built-in Recoding Audio Troubleshooter

 

* Press Windows Key then type ‘troubleshoot’ and hit Enter

* Select “View all” on the left panel and run “Recording Audio” troubleshooter from the list and see if it works.

* Click on “Advanced” and then click on “Apply repair automatically”. Also, ensure to select Run as administrator.

* Click “Next” and follow the on-screen instructions to complete the troubleshooting process.

 

Refer this article to further troubleshoot microphone issues with your PC.

 

If the issue still persists try uninstalling the audio driver from device manager and install the latest audio drivers using HP support assistant.

 

Refer this article to know more information about using HP support assistant.

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation