cancel
Showing results for 
Search instead for 
Did you mean: 
Ada20
New member
1 0 0 0
Message 1 of 2
171
Flag Post

Speaker volume lower after updating

HP Recommended
Pavilion g6 2305sl
Microsoft Windows 10 (64-bit)

After updating the speaker volume is lower even if I set it on 100. I think it's driver problem. I installed the official driver. Do you know a compatible driver to solve this problem?

1 REPLY 1
A4Apollo
Retired
Retired
17,747 17,497 1,301 2,103
Message 2 of 2
Flag Post
HP Recommended

Hi! @Ada20,

 

Try updating the BIOS and audio drivers on the PC to the latest version and check if it helps.

 

You can update the drivers on the PC using HP support assistant.

 

Refer this article to know more information about using the HP support assistant. Click Here

 

Try the steps recommended below.

 

Run Audio Troubleshooter:

 

  - Launch Troubleshooting by typing and clicking “Troubleshooting” in  

  - Windows search.

  - Click on "Playing Audio".

  - Follow the on-screen instructions.

 

Right-click the speaker icon in the Taskbar and select 'Playback Devices'.

 

Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.
Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.
Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.

 

Also, try the steps recommended below:

  • Right-click the sound icon in the taskbar located at the bottom right of the screen and select Playback Devices from the ensuing context menu.
  • Select the current playback device in use and by default, it should be the speakers. Double-click on it to open its properties window.
  • Go to the Advanced section and change the bit rate to either of the following - 24bit/44100 Hz or 24bit/192000Hz - depending on the speaker configuration.

Lastly, try running an audio test from the F2 system diagnostics page to rule out a hardware issue.

 

Refer this article to know more information about running a system diagnostics test. Click Here

 

Hope to hear from you soon!

Take Care! 🙂

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

 

A4Apollo
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation