Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting . Or if you need technical support for your calculator visit: HP Calculators. .
New member
1 0 0 0
Message 1 of 2
Flag Post

laptop can't find integrated microfoon

HP Recommended
HP ENVY x360 Laptop - 15-ed0300nd
Microsoft Windows 10 (64-bit)

my laptop can't find my integrated microfoon. i can only hear others, but tehy can't hear me because i can't use my microfoon because it is unfinded

HP Support Agent
HP Support Agent
31,166 22,298 2,620 3,520
Message 2 of 2
Flag Post
HP Recommended

@sarah2000 Here's a few things that should help:


There are a number of options in Windows sound settings that need to be configured so that the computer recognizes and works with the microphone. Use the steps below to modify the sound configuration as necessary for your microphone.

Open the Sound window

Connect the microphone to the computer.

In Windows, search for and open Sound.
The Sound window opens.

Click the Recording tab in the Sound window.


Then use the following steps to troubleshoot the microphone.

Step 1: Make sure the computer recognizes the microphone

In the Sound window, click the Recording tab.

Right-click an empty area of the Sound window.

Click Show Disabled Devices and Show Disconnected Devices.


If the microphone is listed as Currently unavailable or Not plugged in, disconnect it, then reconnect it to the port. If the microphone is still not detected, refer to the Check the microphone section of this document.

Test the microphone by speaking into it.
Look at the gray bars next to the device name on the Recording tab:

If the gray bars next to the device name change to green, the device is active and an audio signal is passing through the microphone port. The issue should now be resolved.
However, you might still want to make sure the microphone is set as the default microphone using the Step 2: Setting the default microphone section of this document.

If the bars remain gray and inactive, the computer is not recognizing a signal. Leave the recording tab open and refer to the Step 2: Setting the default microphone section of this document.

Step 2: Setting the default microphone

The microphone you want to use might need to be set as the default microphone. Follow these steps to set your microphone as the default microphone:

From the Recording tab of the Sound window, select the port that you want to use. There could be one or more ports.

If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To enable the device, right-click the device name and select Enable.


(By the end of this article all the issues should be resolved)


P.S: Welcome to HP Community 😉


Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation