Automatic Repair Failed

[CallumR101]

My computer froze on me as I was using it, I turned it off and turned it back up, it then come up with the message of automatic repair. Only to this failing, resetting my PC has also failed. I have very important work document files on this laptop that I need to get access to so any help as soon as possible I will be grateful for

[WAWood]

@CallumR101 

Somehow, the Factory Reset has taken on the value of an Urban Legend that is a Miracle Cure for any ailing PC. Not only does it rarely fix the PC, if there is an underlying hardware issue with the PC, it will make matters WORSE by leaving the PC in an unusable state.

Even if there is NOT an underlying hardware issue, the reset puts Windows back to where it was weeks or months ago -- and this will then automatically launch hours or days of Windows Udpates that will bring your PC to a grinding halt, driving the processor up to 100% and the disk utilization to 100% as well. Both of these do NOTHING to speed up the PC.

The HP Factory Reset function relies critically on the contents of the Recovery partition being intact. If those contents get corrupted, which can happen either due to hard drive failing or due to Win10 Upgrade from an older OS, the reset simply will not work -- and will TRASH the PC in the process.

So, you go from having a SLOW PC, to having NO PC. That's not an improvement.

To check for hard drive failing, if your PC is new enough to support UEFI, you can use these steps to test the hard drive: http://support.hp.com/us-en/document/c00439024

If not, you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) press the Function key for testing the hard drive (usually F2) and let it run.

if the tests show that your drive is still working, then follow the instructions below to do data recovery:

Your best bet for recovering data now is to do the following:
1) Remove the disk drive from the old PC. If this is a SATA hard drive or a SATA SSD, this is a simple thing to do. If this is an m.2 SSD, that could be either screwed to the motherboard or soldered to the motherboard. If the second, you would need to have a techician remove it for you, or you risk seriously damaging the PC doing it yourself.
2) If you have a desktop PC with a spare hard drive connector, then connect the old drive to that. If the old drive is a SATA drive, connect both the power cable and the data cable. (This adapter is illustrated below) If the old drive is an m.2 SSD, you will need a USB-to-mSATA cable.

3) Try to retrieve the files and folders you want to save from the old drive and copy them to the new PC.

If this does not work, then you need to do the following:
1) Download and install this utility on a working PC http://www.majorgeeks.com/news/story/recover_data_in_3_steps_with_minitool_power_data_recovery_free_...
2) Run the data recovery utility to see what can be retrieved from the old drive.

If that tool does not find what you need, an alternative is Recuva http://www.piriform.com/recuva

And, if that does not work well, the best tool out there is this one, but only the demo version is free https://www.runtime.org/data-recovery-software.htm