Battery not charging

[MELNORO]

The computer battery does not seem to charge. It keeps shutting itself down even when connected to the main power through the adaptor

[TEJ1602]

@MELNORO, Welcome to HP Support Community!

Let's try reinstalling the Microsoft ACPI-Compliant Control Method Battery 

1) In the search box, type, and open “Device Manager”. 

2) Expand “Batteries”. 

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

4) Click on “Uninstall”. 

5) At the prompt put a check in the box to remove the current driver 

6) Shutdown the computer. 

7) Remove the battery for a minute and then put it back in. 

😎 When the computer comes back up it should automatically find the driver. 

9) Go to Device Manager. 

10) Expand Batteries. 

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software". Do the same thing with Microsoft ACPI-Compliant Embedded Controller. 

Also, try updating the computer - 

Step 1 Windows Updates - 

1) In the search box, type, and open Windows Updates. 

2) Check for updates. 

3) If the updates are available, click on install and restart the computer. 

Step 2 HP Support Assistant Updates - 

1) In the search box, type, and open HP Support Assistant. 

2) Check for updates. 

3) If the updates are available, click on install and restart the computer. 

This document has the most relevant troubleshooting if your battery appears to be not charging. 

Battery Does not Power Notebook or Hold a Charge 

If the issue persists, Let's Run a battery test using F2 (during restart).

Hope this helps!

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!