02-15-2020 02:30 PM
Every time I try to enter the bios settings I get a blue bar asking: Enter Administrator Password. the system disabled message I get is [i 85151041]
but the default bios for that code ( from ) does not work. I need this issue to be solved please,thanks.
02-15-2020 06:05 PM
I know we used to provide Disabled Bypass Codes -- but we're not allowed to do that anymore.
I wish we could help you, but sorry, due to changes in Community policy, we are no longer able to provide any assistance with password reset or recovery issues.
Also please note that now, to resolve a forgotten BIOS or power-on password issue, since that password is embedded into the firmware of the system board, to replace that, a system board replacement is required -- and additional customer costs apply, and while the costs vary by laptop model, they are generally around $200 USD. HP has issued this post about BIOS passwords: https://support.hp.com/us-en/document/c06368824.
In addition, according to the Community's Rules of Participation:
4d. No posts shall include instructions or directions intended to bypass or subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc., or to bypass any safety measures.
For assistance NOW, you have to contact your regional HP Customer Support location directly as they will confirm ownership of the PC before providing any assistance -- something we are not able to do from here.
Goto this page https://support.hp.com/us-en/contact-hp
***Please mark Accept As Solution if my post solved your problem***
I am a volunteer and I do not work for, nor represent, HP