cancel
Showing results for 
Search instead for 
Did you mean: 
MAHIN101
New member
1 0 0 0
Message 1 of 2
115
Flag Post

Can't choose the 256GB SSD I installed as boot derive

HP Recommended
Omen 15-en0xxx
Microsoft Windows 10 (64-bit)

I just bought and installed a 256GB HP S700 SSD. I cloned everything to the new SSD using Macrium Reflect. But when I try to change the boot drive, it only shows the default Samsung SSD. How can I solve this issue?

1 REPLY 1
WAWood
Level 16
Level 16
30,635 30,542 2,790 6,740
Message 2 of 2
Flag Post
HP Recommended

@MAHIN101 

First off, remove the Samsung and boot only from the new drive.  If that works, you know the new drive is bootable.

 

Second, you can use a utility to migrate the boot files from the old drive to the new -- and while I know you do not need to do this, the utility should then change the default boot to the new drive.  You get the utility from here:  https://neosmart.net/EasyBCD/

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation