cancel
Showing results for 
Search instead for 
Did you mean: 
jbrown6519_1
New member
2 1 0 1
Message 1 of 6
315
Flag Post
HP Recommended

Solved!

Computer boots but doesn't go past the sign in screen

HP Envy x360
Microsoft Windows 10 (64-bit)

My HP Envy x360 that I purchased at Best Buy on 08/05/2017 has been acting up this weekend.  Upon starting the computer, it will allow me to get to the password sign on screen but after entry, the screen goes black and does not go any further.  I was able to start it up and run a quick test on the computer and everything passed. 

 

My next step is to perform a system recovery to see if that addresses the problem.  Any other suggestions?  Computer is just over a month in use and my only software additions are Microsoft Office.

 

Thanks.

5 REPLIES 5
Level 17
Level 17
44,688 38,145 3,342 14,041
Message 2 of 6
306
Flag Post
HP Recommended

Solved!

Computer boots but doesn't go past the sign in screen

This is an issue reported by many members over the last few days and is a Windows Update issue. If you leave it sitting at the black screen for 5-10 it should open desktop screen.

HP just released this Patch to install:
http://ftp.hp.com/pub/softpaq/sp81501-82000/sp81965.exe

**Click Accept as Solution on a Reply that solves your issue**
***Click the Thumbs-Up button as a way to say Thanks!***

jbrown6519_1
New member
2 1 0 1
Message 3 of 6
304
Flag Post
HP Recommended

Solved!

Computer boots but doesn't go past the sign in screen

Let me try and see if I can ever get it to go past the sign in screen and apply the update you noted.  Thanks for your help.

Level 17
Level 17
44,688 38,145 3,342 14,041
Message 4 of 6
300
Flag Post
HP Recommended

Solved!

Computer boots but doesn't go past the sign in screen

@jbrown6519_1

It should get to desktop if you wait.10 minutes is longest I have seen anyone report-most say it takes 5 minutes.

**Click Accept as Solution on a Reply that solves your issue**
***Click the Thumbs-Up button as a way to say Thanks!***

0 Kudos
Mark4x4
New member
1 1 0 0
Message 5 of 6
51
Flag Post
HP Recommended

Solved!

Computer boots but doesn't go past the sign in screen

I have left my pc on for a day and it’s not going past the black screen. I have reset to back to factory settings but it still will not go past the black screen so how do I install the HP patch if I can’t open the pc 

0 Kudos
Moderator
Moderator
19,576 14,911 305 1,163
Message 6 of 6
39
Flag Post
HP Recommended

Solved!

Computer boots but doesn't go past the sign in screen

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you

I work on behalf of HP
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation