cancel
Showing results for 
Search instead for 
Did you mean: 
oct94abhi
New member
1 0 0 0
Message 1 of 2
136
Flag Post
HP Recommended

Solved!

Failure id

Pavilion N003TX
Unknown

My pc is stuck at boot showing only hp boot logo.

Running HP PC hardware diagnostics on hard drive gave 

FAILURE ID: 9U10HS-70K9ML-MFPWXF-60XB03

what does this failure id mean?

1 REPLY 1
Level 15
Level 15
9,839 9,788 1,923 3,690
Message 2 of 2
117
Flag Post
HP Recommended

Solved!

Failure id

Hi,

The failure id indicates "Hard Disk 1 Quick Test Failure"

You will need to replace the hard drive.

Basically, you can use any 2.5" SATA3 Hard Drive (max 2TB because of the thickness of drive). You could also replace with a 2.5" SATA3 SSD (of your desired capacity) which would give a great boost to the everyday performance of the notebook.

Examples:

https://www.amazon.com/Seagate-BarraCuda-Internal-Hard-Drive/dp/B07H28QRKN/ref=dp_ob_title_ce

https://www.amazon.com/Crucial-MX500-500GB-NAND-Internal/dp/B0784SLQM6/ref=sr_1_2?crid=184962H9H6KFC...

 

On page 67 of the service manual, you can see the steps to install the drive

http://h10032.www1.hp.com/ctg/Manual/c04439615

 

To install Windows again:

Download media creation tool from Microsoft on PC (different PC), run and create a bootable pendrive with the OS on it. (there is an explanation on the Microsoft web page on how to create the pendrive). Create the drive with Windows 10 Home 64-bit edition. Windows will automatically activate once installed and connected to the Internet.

https://www.microsoft.com/en-us/software-download/windows10

If you choose this option you will need to use the pendrive to perform a clean install of Windows 10. You might need to disable fastboot and secure boot in BIOS (probably not). So, insert the pendrive in the PC and it should boot directly from the drive. If not, turn off the PC by holding the power button. Press the power button and immediately keep pressing ESC until the startup menu appears and then press F9 and choose the pendrive in the boot menu. Once it boots from pendrive follow the procedure to install Windows.

 

When finished installing allow Windows to completely update and find all or most drivers. You can follow this process by going into settings > Security and update > click on Verify for updates. You might need to reboot a couple of times.

 I recommend installing HP support assistant which will help keep your drivers up to date and much more. You can download the latest version from here.

https://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

Once completely updated you can go into device manager and see if there are any missing drivers (there will be yellow exclamation mark next to the device). You can find these drivers and software on HP support page for your product.

https://support.hp.com/us-en/product/hp-pavilion-15-n000-notebook-pc-series/5401225/model/5422963/ma...

 

Hope it helps,

David

Please click on thumbs up for thanks

Please click on accept as solution if answered your question

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation