cancel
Showing results for 
Search instead for 
Did you mean: 
S2408-larenzo
New member
1 0 0 0
Message 1 of 2
86
Flag Post

First time here. Bew HP laptop windows 10..black screen/ selected boot device failed press enter to

HP Recommended
HP Pentium laptop 15-dw1081 wm / 9VV89UA#ABA
Microsoft Windows 10 (64-bit)

Open my laptop have a black screen with a blue box saying the selected boot device failed press enter to continue than it has okay in a black box if you hit enter it just turns off it doesn't do anything but show me the black screen with the blue box

1 REPLY 1
WAWood
Level 16
Level 16
30,451 30,358 2,773 6,704
Message 2 of 2
Flag Post
HP Recommended

@S2408-larenzo 

This issue is often due to a failing drive. So, let's check that first, because if it is failing, it would need to be replaced and there is no point then in doing anything else until we confirm that.

If your PC is new enough to support UEFI, you can use these steps to test the hard drive: http://support.hp.com/us-en/document/c00439024

If not, to check the drive you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) Press the Function key for testing the hard drive (usually F2) and let it run.
If the drive checks out OK, then report that and I can provide you options for reinstalling Windows on your PC.

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation