cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
DKC04
New member
1 0 0 0
Message 1 of 2
241
Flag Post

HP laptop is under loop of automatic repair mode. HDD is ok. Found one error about diagnostic update

HP Recommended
HP laptop 7th gen i5
Microsoft Windows 10 (64-bit)

My HP laptop windows 10, 7th Gen i5 is facing the issue of automatic repair loop. Checked HDD found ok.

Diagnostic not updated is the one error message found.

Hoe to resolve?

1 REPLY 1
WAWood
Level 16
Level 16
34,852 24,531 3,148 7,861
Message 2 of 2
Flag Post
HP Recommended

@DKC04 

This message means that Windows has become corrupted -- so much so, that it can no longer boot. MS puts up this message to tell you that Windows will repair itself -- but in my experience of having seen this dozens of times over the years, it has NEVER been able to make those repairs. So it keeps rebooting and redisplaying this again and again -- until you get disgusted and turn off the PC!

This problem is nearly impossible to fix -- from the standpoint of making repairs and leaving your stuff intact. Some steps for trying this are listed below, but they are very hard to do and if they do not work, you are faced with doing a complete Windows reinstallation to get your PC back working again.

And if that is the case, you need to come back here and tell us what failed so we can provide instructions for things you can to do retrieve some data from your drive before you do a complete reinstallation.
----------

First thing you need to do is see if you can restart in Safe mode -- by doing these steps: https://www.tenforums.com/tutorials/2304-boot-into-safe-mode-windows-10-a.html

If you don't know how to start using Advanced Startup Options, then read this: https://www.tenforums.com/tutorials/2294-boot-advanced-startup-options-windows-10-a.html

Then, follow these steps to reset Windows Update: https://www.tenforums.com/tutorials/24742-reset-windows-update-windows-10-a.html

If these work, when you finally reboot, you should then be able to login to a working Windows desktop.

If these don't work, you would have to resort to reinstalling Windows from scratch.



I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation