cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
FrankJay71
New member
1 0 0 0
Message 1 of 2
94
Flag Post

Solved!

Hard Drove error GGF3UF-8N2AQN-GXGGQJ-60Q803

HP Recommended
HP Elite x360 m6 convertable PC
Microsoft Windows 10 (64-bit)

I'm able to boot my HP Elite x360 m6 convertable PC to Windows, though slowly, but once I get to the desktop everything locks up.  I ran system  and component diagnostics in the BIOS menu and got the Failure ID:  GGF3UF-8N2AQN-GXGGQJ-60Q803, with product ID:  W2K44UA#ABA when running the hard drive test. The test also gives you a QR code.  The QR code takes me to an HP page that doesn't seems to exist any longer, and googling the Failiure ID produces no results.  Does anyone know what's likely going on?  Should I just replace the hard drive or is there something else?

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
banhien
Level 19
Level 19
95,798 64,512 12,408 21,371
Message 2 of 2
Flag Post
HP Recommended

@FrankJay71 

 

Sadly to say: Most of the time the 24 char disk failure id indicates the HDD is failing and it needs to be replaced.. Is it still under warranty ? If NOT, you have to replace yourself then rebuild your machine.

 

For (original) Windows 10. Please use Cloud Recovery tool:

 

                https://support.hp.com/au-en/document/c06162205

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
banhien
Level 19
Level 19
95,798 64,512 12,408 21,371
Message 2 of 2
Flag Post
HP Recommended

@FrankJay71 

 

Sadly to say: Most of the time the 24 char disk failure id indicates the HDD is failing and it needs to be replaced.. Is it still under warranty ? If NOT, you have to replace yourself then rebuild your machine.

 

For (original) Windows 10. Please use Cloud Recovery tool:

 

                https://support.hp.com/au-en/document/c06162205

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>

View solution in original post

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation