I have a pavilion g series laptop and it won't boot up.

[zebra020955]

When I try to boot up the laptop all I get is a curser light blinking in the top left corner. The wifi light is on . i can try different types of diagnosis but I can't get to the system recover screen. I can open up the bios page, the boot page , but nothing to try and recover the system 

[zebra020955]

I took the hard drive out and it does the same thing, Is this hard drive bad. 

[KrazyToad]

@zebra020955

Welcome to HP Community

I have gone through your Post and would like to help

Are you able to boot to BIOS after removing the Hard drive?

If you are still unable to access the BIOS without the Hard drive, please contact HP Support in your region for Service Options

1) Click on this link - www.hp.com/contacthp/ 
2) Select your product type below.
3) Enter the serial of your device. 
4) Select the country from the drop-down. 
5) Select the chat or get phone number options based on your preferences. 
6) Fill the web-form and proceed further.
 

Thank you

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

[zebra020955]

Yes I can get to bios. I never get the HP screen, If I don't hit the escape button it goes straight to the blinking curser

[sandytechy20]

@zebra020955

This seems to be a hardware issue.

I request you to talk to HP support.

They might have multiple options to help you with this.

1. Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true
2. Select the country.
3. Enter the serial of your device.
4. Select the country from the drop-down.
5. Click on "Show Options".
6. Fill the web-form. A case number and phone number will now populate for you.

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.