Showing results for 
Search instead for 
Did you mean: 
Level 1
9 7 0 0
Message 1 of 2
Flag Post
HP Recommended

Laptop stuck on hp logo

Hp pavilion x360 m3 convertibl
Microsoft Windows 10 (32-bit)
So I decided to restart my laptop, and when it started to restart the computer screen went black and the laptop shut down and when I turned it on, it would just get stuck on the hp logo turning on and off. What can I do to Fix it?
Level 15
Level 15
8,929 8,824 725 3,261
Message 2 of 2
Flag Post
HP Recommended

Laptop stuck on hp logo

Hi @Littletigger35


Welcome to the HP Support forum. Happy New Year !


This is happening because the computer cannot successfully and fully load Windows. This may be hardware problem or software problem. Did you perform some change recently ,something new these days, last hours before the issue started ?


Perform hard restart/forced reset. More info and how to here >>




 Please, perform some basic hardware checks


1. Please, shutdown the computer using the power button

2. Power it on.

2.1 As soon as you press the power-on button, immediately begin hitting the Esc button (like tap-tap-tap).

This should open a HP Startup Menu which may look similar to this one


3. Choose F2 to open System Diagnostics. Follow the on-screen instructions to perform System Test >> Quick test.

This will check major hardware componets for issue (do it just in case) . Here is more info >>


If there are no system checks/no quick tests, perform HDD and RAM check.


Let me know the test results. If the tests pass without issues, continue. If not, please, let me know


4. Repeat steps 1-2 above but when HP Startup menu opens, please choose F11 for System Recovery options.

The computer should boot from it's recovery partition to open you various recovery options. Note, that F11 option will only work if the recovery partition is there (not deleted) and intact. From there, you have prenty of options to choose from. Every HP computer comes with recovery partition present to assist in tough moments.


Please, perform "System Restore" first in an attempt to fix the issue. Please, restore back to previous days (restore point) where the issue was not present. Here is more info:





Hope this helps. Let me know how it goes.


****  Please, click on the button below to mark this post as an ACCEPTED SOLUTION if it helped you
****  Don't hesitate to hit the THUMB-UP+ button below to say THANKS or give LIKE
I am not employed by HP Inc. **** I express personal opinion only. **** HP Expert **** IT Commodity and Cyber Security professional

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation