• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about Hotkey issue, Click here to check it out!
HP Recommended
Probook 450 G8
Microsoft Windows 10 (64-bit)

Hello,

 

First time poster.

 

I have a HP Probook 450 G8 that will not find a bootable drive to install Windows 10. It does however install Ubuntu 20.04. I am using a USB drive, tried multiple types, to install windows. Any help is appreciated.

 

Best,

 

 

5 REPLIES 5
HP Recommended

Hi:

 

Here's what you need to do to reinstall W10 on your notebook...

 

See the info at the link below.

 

https://support.hp.com/us-en/product/hp-15-f2000-laptop-pc-series/35900344/model/35900346/document/c...

 

The link they direct you to the HP support site doesn't work.

 

Here is the link to the driver you need...

 

This package contains the Intel Rapid Storage Technology Driver for the supported notebook models and operating systems. The Intel Rapid Storage Technology is designed to provide functionality for the Intel Storage Controllers. The driver improves Serial ATA (SATA) disk performance with Native Command Queuing.

 

18.0.1.1138

 

https://ftp.hp.com/pub/softpaq/sp108501-109000/sp109000.exe

 

There is another thing I don't understand in that document, and that is where HP tells you to right click on the Intel driver file and select Extract to

 

When I ran through the steps, I don't get an Extract to option when I right click on the file.

 

So, if you have the same issue, download and install the free 7-zip file utility from the link below.

 

The 2nd file at the top of the page is for 64 bit.

 

7-Zip (7-zip.org)

 

Then you can right click on the exe file, select 7-Zip from the menu, and select Extract to: and let it extract the file into its folder name (sp109000), and copy that folder to your USB flash drive, and continue with the instructions.

 

HP Recommended

That did not work. I formatted the USB to NTFS > installed media creation tool (Windows) on USB > downloaded driver for my model > used 7ZIP to extract exe, after being downloaded to my main drive, to the bootable USB > attempted to boot = still no drives recognized.

 

Pop!_OS is running fine though

HP Recommended

Hello

 

boot from Windows 10 installation USB key.

when you arrive at "install" winodws , pres shift+F10 to open a CMD promtp

then type

DiSKPART

lis dis (it must shows two disks: the internal NMVE SSD as disk 0 and the USB Key as Disk 1)

if you see two disk as I wrote above, then

sel dis 0

clean

exit

then continue with Windows 10 installation.

NVME drivers is already include in Windows 10. which version are you trying to install ? older OS supported is 1903 

 

bye 

 

 

HP Recommended

Hi, @uhohevo 

 

See this discussion...the driver I had posted originally did not work for this person, but the one I attached in the reply marked as 'solved' did.

 

I pulled the driver file out of the IRST driver file for the HP Elitebook 850 G8, which has a newer version of the driver on the support page than the 450 G8 has.

 

Solved: Re: HP Laptop 15S-FQ2010NP - No Drivers - HP Support Community - 7987228

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.