-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- No boot device found

Create an account on the HP Community to personalize your profile and ask a question
07-20-2024 12:49 PM - edited 07-20-2024 12:53 PM
boot device not found .
In hp bios , I did restore default and computer started working but again after somedays same problem occurred& this time I disabled legacy support but again same problem,and this time nothing working . What should I do now.
07-20-2024 01:14 PM - edited 07-20-2024 01:19 PM
What happened when you press F2 and ran disk diagnostics: did the drive pass the test?
If it failed drive diagnostics then you need to replace it
If diagnostics passed then the drive may have corrupted files and can be repaired.
If you go to this site and put in your serial number I suspect two drives will show up
One is a HDD data drive the other is the SSD boot drive.. If the boot drive is Defective you need to replace it and reinstall your factory software
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
07-21-2024 01:24 AM - edited 07-21-2024 01:26 AM
Could be overheating.
CPU & GPU can be be checked
You might be able to check for GPU/CPU temperature problems using this tool (GPU-Z) and selecting 'sensors'
|
The m.2 drive or any sata hdd can also be checked for too high a temperature.
It can provide more diagnostics than the HP or Microsoft.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it