On bootup the screen alternates from blue to black

[DB1955]

When I turn on the laptop the system goes through an initial start up the Win 10 spinning wheel. It freezes on the second spin then goes to a blue screen, It will then start the alternation between a blank blue screen and a black screen. Continuously. How do I fix it?

[The_Fossette]

@DB1955,

Welcome to the HP Support Community!

I reviewed your post and I understand that the computer is not booting to Windows.

Don’t worry, I assure you I will try my best to get this sorted.

I recommend you follow the steps in the below article and check if it helps.

https://support.hp.com/in-en/document/c04718479

Let me know how it goes and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

[DB1955]

Well, I found a solution with my hours of scouring the internet and trying many things. many things maybe I should't have done, but you can't undo some things you do to your computer. The fix was so very simple, I went in and disabled my graphics card and "bam" problem resolved. once it fired up I enabled my card and all is OK! So random... but I am back in action. Thanks to all who looked and scratched your head.

[The_Fossette]

@DB1955,

Perfect, I am really glad to hear that!

If any other questions arise, please feel free to write back to me.

Cheers!