Stuck at bootup "hp logo" screen

[Saurabh_K]

After the latest windows update my laptop was showing me the BSoD with "CRITICAL_SERVICE_FAILED" error, and I was unable to use reset PC or repair tool because the system continuously rejecting my password.

So I used the REMOVE EVERYTHING option to gain my access. 

Everything was working a bit fine but after the automatic windows update my bootup was slowed to death.  It's taking forever to boot, I checked the startup menu but it was fine with no load. The troubleshooting window says "it has found and corrected some WINDOWS UPDATE ISSUE".

But now after rebooting my laptop,  it's totally stuck with the hp logo screen with no progress from hours.

[Riddle_Decipher]

@Saurabh_K Here's a series of steps that should help resolve the issue for good, it's a bit lengthy, so please go through it one step at a time, we'll be here if you need us:

Step 1: Remove discs and devices

Before troubleshooting startup issues, remove or disconnect all discs and devices from the computer.

1. Turn off the computer.

2. Remove any discs and USB devices.

3. Remove memory cards from the card reader slot.

4. Disconnect all non-essential devices such as printers, scanners, external hard drives.

5. Leave only the mouse, keyboard, and monitor connected.

After you have removed all discs and devices, turn on the computer.

• If the computer starts, reconnect devices one at a time, to determine which disc or device is causing the problem. If the issue is solved, troubleshooting is complete.

• If the computer still does not start and exhibits the same problem, press and hold the Power button to turn off the computer. Do not connect anything, and then continue troubleshooting.

Step 2: Perform a hard reset

Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components.

Decreasing stored power is sometimes referred to as a Hard Reset.

After you have completed these steps, if the computer startup issue is resolved, go to HP PCs - Updating Drivers and Software with Windows Update (Windows 10, 8, 7), and then go to HP PCs - Using HP Support Assistant (Windows) to update all device drivers.

IF THE ISSUE PERSISTS, AND YOU NEED FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 3 ONWARD

(By the end of this article all the issues should be resolved)

P.S: Welcome to HP Community 😉

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.