cancel
Showing results for 
Search instead for 
Did you mean: 
DRANUPAM
New member
4 2 0 0
Message 1 of 4
611
Flag Post

hp pavilion x360 14-cdoo7tu notebook nvme m.2 ssd not showing in bios menu to set the os proirity

HP Recommended
HP Pavilion x360 Convertible 14-cd007tu
Microsoft Windows 10 (64-bit)

hey guys, i have HP Pavilion x360 Convertible 14-cd007tu laptop 

due to its slow hdd performance i i decided to upgrade it with kingston nvme m.2 pcie ssd 

my wndows folder show that i had ssd in laptop i will drop the pic of that but when i cloned my windows c drive from hdd to ssd and wanted to set boot priority of my windows 10 os to ssd it is not showing in bios menu it only shows my old hdd in os boot manger so i cant set my priority and not able to boot through ssd, i tried disabling secure boot option but it doesnt work, i also tried to remove my hdd and again open bios menu so it is again show my hdd even i had removed it and it was not recognising my ssd i was shocked and i m exhausted and crying pls help me anyone.1.jpg2.jpg3.jpg

3 REPLIES 3
Paul_Tikkanen
Level 21
Level 21
129,870 120,047 19,644 30,020
Message 2 of 4
Flag Post
HP Recommended

Hi:

 

Did you try just booting from the M.2 SSD with the hard drive disconnected?

 

Don't go into the BIOS, just turn on the PC and see if it boots from the M.2 SSD.

 

Reply
0 Kudos
DRANUPAM
Author
New member
4 2 0 0
Message 3 of 4
Flag Post
HP Recommended

 to disconnet well i removed my hdd so it is saying install windows and i t can read my ssd and there is option in device manager properties of hdd can i try to disable ssd from there without any physical removal

 

Reply
0 Kudos
Paul_Tikkanen
Level 21
Level 21
129,870 120,047 19,644 30,020
Message 4 of 4
Flag Post
HP Recommended

Connect your 2.5" drive back up for now, and see if your notebook is supported by the HP cloud recovery tool which you can use to create a bootable USB recovery drive that will reinstall W10, the drivers and the software that originally came with your notebook on the new M.2 SSD

 

Here is an info link for how to use that utility...

 

HP Consumer PCs - Using the HP Cloud Recovery Tool (Windows 10, 7) | HP® Customer Support

 

After you make the bootable USB recovery drive, disconnect the hard drive again and see if the cloud recovery tool will install W10 directly onto the SSD and hopefully you will be able to boot from it.

 

 

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation