laptop will not wake up

[Wayne-Culver18c]

When I leave the laptop or open my laptop lid without shutting down, it does not wake up automatically or by clicking the mouse or keys. I have to hold the power button for 10 seconds to wake it up. After this, it will wake up automatically but after some time it won't wake up automatically again. This is extremely annoying.

I had a HD failure which has been replaced with a compatible SSD

[The_Fossette]

@Wayne-Culver18c,

Welcome to the HP Support Community!

I reviewed your post and I understand that the computer is not waking up from sleep.

Don’t worry, I assure you I will try my best to get this sorted.

I recommend you follow the below steps and check if it helps.

Press ‘Win + I’ shortcut keys to open Windows Settings app.

Click on ‘Update & Security’, then go to the ‘Troubleshoot’ section from the left-side menu.

Scroll downwards a bit and click on the ‘Power’ option.

Click on ‘Run the Troubleshooter’. It will start detecting the problems and if it founds, go ahead fixing it.

If you continue facing the issue, then follow the below steps.

On your keyboard, press ‘Windows key + R’ and type ‘Powercfg.cpl’ in it.

Hit the ‘Enter’ key to open power options in the control panel.

From the left-hand side, click on ‘Choose what the power buttons do’.

Then, click on the link ‘Change settings that are currently unavailable’.

From the bottom given power button options, uncheck the ‘Turn on fast startup’ option.

Click on ‘Save changes’ button.

If the issue persists, follow the below steps.

Go to the ‘Start’ menu and type ‘Control panel’ then hit the ‘Enter’ key.

From the top-right filter, choose ‘Large icons’ and navigate to the ‘Power Options’,

Click and open the ‘Power options’.

Select the power plan according to your requirement and click on ‘Change plan settings’.

Click on ‘Change advanced power settings’.

In the power options windows, click on the button ‘Restore plan defaults’.

Click on ‘Apply’ and then ‘OK’ button.

Let me know how it goes and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

[RMartin1974]

I have the exact same issue. I've performed all your steps. Unfortunately this has not fixed the problem. Any further advice please?

[The_Fossette]

@RMartin1974,

Welcome to the HP Support Community!

I assure you I will try my best to get this sorted.

In order that I may provide you with an accurate solution, I will need a few more details and I would appreciate if you could, perhaps elaborate on your concern.

• What is the exact model for your computer?
• What is the operating system you are using?
• Have you made any software or hardware changes on the computer?

Look forward to hearing from you and you have a great day!

Take care.

Cheers!

[Wayne-Culver18c]

Hi,

I have tried all of the suggestions and the problem is still present.

do you have further suggestions

thanks

wayne

[RMartin1974]

Hi

The model is HP Pavilion14-ce05501ne

Operating system is Windows 10

No hardware changes. No changes to Windows or HP software which is all up-to-date.

[The_Fossette]

@Wayne-Culver18c,@RMartin1974,

I recommend you perform a system restore back to the date when everything was working fine.

Follow the steps in the below article to perform a system restore.

https://support.hp.com/in-en/document/c03327545

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

[RMartin1974]

Hi. Unfortunately I did not have a system restore point saved. Is there anything else I can do other than reinstalling windows?

[Riddle_Decipher]

@RMartin1974 I suggest you make a few changes to the way sleep mode works under power options:

• Change - "Put the computer to sleep" to preferred time,
• And Change - "Turn off the monitor" to never.

If the issue persists, try the below steps:

Disabling the hybrid sleep, followed by updating all available Windows updates and the BIOS update from the HP website, please follow the below steps to disable the hybrid sleep after performing a hard reset on the device should help resolve the issue.

1. In Windows, search for and open Control panel.

2. Make sure the View by setting is set to Category, and then click Hardware and Sound.

3. Click Power Options.

4. Click Change plan settings for the power plan that is selected.

   

5. Click Change advanced power settings.

   

6. Expand Sleep, and then expand Allow hybrid sleep.

7. Select Off from the On battery drop-down menu, and then select Off from the Plugged in drop-down menu.

   
    

8. Click OK.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & FOLLOW THE STEPS UNDER - The computer does not wake up from sleep or hibernate mode.

(By the end of this article all the issues should be resolved)

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.