cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Pajith
New member
1 0 0 0
Message 1 of 2
133
Flag Post

while lap goes to sleep mode it display black i cannont come back

HP Recommended
Elitebook 8440p
Microsoft Windows 10 (64-bit)

hello

i am hp eliteboojk 8440p user. when i put my laptop aas sleep mode it dispaly was black screen then on it it cannot  come back it is still in the back screen how to i solve it.please let me know.

Thanks

1 REPLY 1
WAWood
Level 16
Level 16
34,852 24,531 3,145 7,829
Message 2 of 2
Flag Post
HP Recommended

@Pajith 

When you get the laptop back running, read through the details below ...

 

Win10 has enabled a new hibernation process known as Fast Startup -- which is enabled BY DEFAULT. This is different from Fast Boot, which is a BIOS/UEFI option.

Fast Startup is supposed to dramatically speed up the booting process, but in some PCs, it actually slows it down or causes it to hang. It's also a new form of hibernation known as hybrid sleep -- and this causes battery drain to maintain the state of the PC while turned off. In some rare cases, it can also cause a laptop to overheat because the processor is still running and still generating heat, as this has been reported when the laptop was turned off and put inside a case.

Disabling Fast Startup might fix booting and shutdown problems.

There are two ways to disable FastStartup in Win10: (1) through the Control Panel, and (2) through an elevated command prompt.

Control Panel - Open Control Panel --> Power Options.
Select "Choose what the power buttons do"
Select "Change settings that are currently unavailable"
At the bottom of the Window, under Shutdown settings, uncheck the box regarding fast startup

Elevated command prompt - run the following command:
REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F

In both cases, reboot Windows.

NOW, Fast Startup is disabled.

See if that helps.



I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation