Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post
HP Recommended

Control fan speed on Omen 17 w010ng

HP Omen 17 w010ng
Microsoft Windows 10 (64-bit)

HP Omen 17 so noisy - how to control fan speed?


My new HP omen 17 w010ng drives me crazy - it is so noisy. Even if the Geforce is switched off, the left fan starts to switch on very easily, running a Youtube video is enough.


I have read about HP Control software allowing to control fan speed - it was very difficult to install and I only found out that the ventilator settings are already on normal. I switched the ventilators off in Bios, still not much change. Then i ensured in the graphic driver that Geforce is only used for Lightroom and Photoshop, this helped a bit, but still I see that ventilators speed up far earlier then required.


I have tried HWinFO64, but no fan speed controls are possible. The freeware Speedfan is the same, I see the fan speed but cannot control it.  I found the freeware Notebook FanControl, but there is no configuration file for Omen 17 available.


Did anybody out there solve the problem? How can I control and reduce the fan speed?

HP Support Agent
HP Support Agent
3,304 3,302 178 338
Message 2 of 2
Flag Post
HP Recommended

Control fan speed on Omen 17 w010ng



Welcome to HP Support Forums. Best platform for all sorts of solutions, tips and tweaks to your questions/issues.


To have the best experience on HP forum, visit our HP Forums Guide to know more.


Cooling Fan speed higher than normal. Is that right?


Thank you for sharing the issue details. I would like to help you.


Generally, the Fan speeds are set a specific top and bottom end temp ranges and cannot be changed.

However, if the Fan speed has increased drastically, it could be due to BIOS corruption as well which can be fixed by updating it or reflashing it.


I recommend you to try performing the BIOS update for the following hardware and check if that fixes the issue




Hope this helps. Let me know for more.


Happy posting.




Glad to help you. I work for HP

Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click the Kudos Thumbs Up" to say “Thanks” for helping!

I work on behalf of HP

If you found this post helpful, you can let others know by clicking the Accept as Solution button. You can also show your appreciation, with a kudos, by clicking the Thumbs up" button!

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation