Adaptive Batter Optimiser Enabled/Not Activated

[Prateek55]

Product:  Victus by HP Gaming Laptop 15-fa0000

Operating System: Microsoft Windows 11

Hi, 

So I want to enable and activate this feature in my BIOS, but when I enable it and check if it is, it just says; enabled/unactivated.

How do I activate this feature? Also, I've tried the below steps from another ticket, but still, the status is enabled / not activated.

I recommend you follow the below steps.

1. Start or restart the computer.
2. Press F10 to enter HP Computer Setup (F10 setup).
3. Select Configuration.
4. Change the status to Enabled or Disabled as desired.
5. Save the change and Exit.

Determine if protective measures have been activated:

1. Start or restart the computer.
2. Immediately press Esc to access the startup menu.
3. Press F2 to start HP PC Diagnostics UEFI.
4. Select Power > Battery.
5. Select Run Once.
6. Once the test completes, select Battery Details.
7. Check the Adaptive Battery Optimizer status. Three possible statuses are:
    

   • Enabled/Not Activated: the feature is ON, but no protective measures are active.

   • Enabled/Activated: the feature is ON, and protective measures are active due to battery temperature, battery charging status, or usage patterns.

   • Disabled/Not Activated: the feature is OFF, and no protective measures are active.

Thanks!

Greetings Prateek.

[Elohi_NR · Accepted solution]

Hi @Prateek55,

Welcome to the HP Support Community. 

I'd like to help!

Since you have already performed the required steps, you will need additional support from our internal teams in HP. For that to happen, we will give you additional instructions/information via Private Message.

Please check your inbox on the forums page for private message.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!